Search This Supplers Products:Sec-butyl AcetateCyclohexanoneDMFIsopropyl AlcoholTrichloroethyleneAmmonia Chloride
Paramtents
100% virgin PTFE PTFE materail for molding
Packging & Delivery
Min Order50 barrel
Briefing
Detailed
Specification:
1.Smoothness & Cleaness : white sheet surface, even texture ,no metal residue quantity
2.Tensile strength: >= 29MPa
3.Elongation At Rupture: >=300%
4.Volume Density (g/L): 300~450
5.Residue on sieve (65um)%: <= 3
6.Moisture Content: <= 0.4%
7.Melting Point: 327±5
8.Standard Relative Density: 2.130~2.160
9.Thermal Ins Index: <=20
10.Electric Strength( KV/mm):>=60
11.For Check: Executed according to requirement of HG/T2903-1997
12.For Process: For Molding
13.Usage: The resin can be used as the general required electric
source,which is suitable for making film, the products of thin wall, seal,gasket, club,panel, tube,
14. It is packed in double layer plastic bag with circular barrel outside
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.